The selection of a CAD/CAM system is an important one for any design or manufacturing company. It has ramifications all the way from the beginning of the product concept phase to the end of the manufacturing process. It is likely that, only a single CAD or CAM vendor will be chosen, (although multiple stations may be procured). For most companies, a CAD/CAM software purchase decision is a one-time event. Because of this fact most companies have somewhat limited experience in the purchase of a CAD CAM system. A reliable CAD CAM consulting firm can be an important ally in the process of system selection.
This review will consider five important criteria. These criteria are listed in order of importance. Most companies place a great emphasis on initial cost and the list of features / benefits first. In this recommendation, ease of use is listed first.
1)Ease of use - productivity
2)Vendor stability and longevity
3)Features ? functionality
4)Cost ? total cost of system
5)Maintenance / upgrade and training costs
1) Ease of use
In practical terms, the ease of use of the system will have the most significant return on investment. It is often forgotten that design or manufacturing personnel may spend anywhere from 100 ? 2000 hours per year on the system. (Estimate based on 2 hours part time per week, or 40 hours per week on a full-time basis.) The average cost of this labor is many times greater than the cost of the CAD CAM system itself. Even a 10 % reduction in time spent to complete a particular task could have a savings of over $ 5,000.00 in labor costs, the first year alone ! This is more than the entry price of most CAD systems !
Note: This estimate is based on use of the system on a full-time basis with a conservative calculation of a $ 25.00 / hour labor rate. Ease of use as it relates to productivity, is the single most important criteria to evaluate, and yet it is also the most difficult of the criteria to quantify.
Benchmarks: some companies attempt a timed benchmark between various systems, to evaluate this measure of productivity. This is problematic, however, since these types of competitive benchmarks are just as easily influenced by the individual skills of the CAD or CAM engineer, as they are by the software system itself.
It is wise to ask the vendor to demonstrate the creation of a particular part that is similar to others that you have designed or manufactured in the past. It is much easier for you to compare systems on a part that you are already familiar with than a ?canned? demo on a part the vendor chooses.
2)Vendor stability
Make sure that the company chosen has a stable financial base, and has been in the industry for at least 10 years. One of the worst things that can happen to CAD/CAM customers is to lose the support and upgrade path for their software, because their CAD/CAM software vendor has gone out of business. This leaves customers stranded, and eventually their software will become relatively obsolete.
3) Features and functionality
Many prospective CAD/CAM customers try to calculate the value of their software based on a long list of features, and try to compare to other systems. The difficult of this is that the terminology used to describe certain functions varies from system to system. Vendors may also unintentionally or intentionally obfuscate this point, by claiming unique functionality which is really just a question of semantics.
For most customers, the CAD/CAM software industry is sufficiently mature to have more than enough functionality to satisfy even demanding customers. If your job requirements are highly specialized, or unique to your industry, then you may need to carefully examine specific functionality to make sure the software you choose can meet your needs. In terms of CAD software, this might be libraries of standard components particular to your industry, or it could be a unique type of warpage calculation, etc. For CAM systems, pay particular attention to specialized turning machines that are not simple 2-axis plus C-axis milling. Screw machines, multiple turrets or rotary turrets on a lathe, can be problematic. For milling machines, 4-axis and 5-axis applications can be very tricky to evaluate and can present special challenges for the machine tool manufacturer, and software vendor.
Again, a CAD/CAM consultant can be invaluable to scope out specialized requirements, and assure the the software meets the specific intended application.
4) Cost
This is the easiest criteria to evaluate, but one caveat emptor needs to be addressed. Most CAD/CAM software is sold on a modular basis. No company should purchase more CAD/CAM modules than they need. There should always be an upgrade path open for a later purchase of additional modules if needs expand or change. Buyers also take note that this industry is extremely competitive, and in general customers really do get what they pay for. Prices are stable and well established, and there really are no fire sales, or steep discounts available. One further note: it is usually wise not to purchase software that has been licensed to another company, without expressed written consent from the software vendor. Many software purchase agreements prohibit transfer of a particular license from one company to another, (unless the software has been transferred as a result of a company buyout or merger.
5) Maintenance, Upgrades, and training and support
Users should not be shocked to find that software is regularly upgraded, at additional cost. This is true across the entire software industry. Since CAD/CAM Software is generally more costly than other type of software, is should also be no surprise that software upgrades are also more expensive than other types of software. Upgrades should be available on a regular basis. It is good to ask what the time period was between the last several upgrades. Most CAD/CAM software should have an major upgrade every 12-18 months. Users should not be penalized for failure to upgrade. They may find, however, that reasonable restrictions may be placed on support for badly outdated software.
Support hours should be reasonable, and at cover business hours, with some consideration to start and finish times within the time zones. Training costs should not be exorbitant. Group training for several employees at one time, or on-site training may also be available.
The use of good buying common sense and informed decision making using the above criteria can make the difference between a smooth CAD/CAM installation and something less than desirable.
John Lombaerde is a CAD/CAM/CNC Specialist with over 20 years experience in advanced manufacturing technologies. He is a Designer, CNC Programmer, CNC Machinist, a CAD/CAM consultant, and a Search Engine (SEO) Strategist. For additional information contact: For more information, see CAD CAM Consulting |
No comments:
Post a Comment