Learn CAD

Design Software

What I used to do…
Before I found design software I was in the stone ages. I would actually hand lay out a template on a piece of paper. Then cut it out. Next, I would tape the design onto a piece of steel and trace around it with a Sharpe Marker. Finally, I would cut out the piece I wanted.

No matter what, it was never exact. There would always be something wrong. Things like wavy lines, gouges and “unique parts” were the norm. Measurements were never as exact as I would have liked either. That usually caused some fit-up issues, followed by some grinding. If you know anything about fabrication, grinding is the enemy of your time.



Why use Design Software?
I knew there had to be a better way so I found some design software to try out. Yes, it does take some time to learn. Think about it, like anything else in life, something that is worth it takes some time. This is also the situation of taking one step backwards to move ten steps forward.



Here are some advantages of using Design Software:
Saved file you can use over and over

Transfer the design to others

Can use exact measurements

Repeatability in design



Here are some disadvantages of using Design Software:
Cost money

Takes time to learn

May not be the quickest way of making something if it is a “One Off”







Sign Up Now! I have put together a FREE 7 Day E-Course that teaches the basics of CNC. Click Below and Sign Up Today!


Click Here for a Free CNC E-Course